Tkool Electronics

The staff had said that with our extensive experience in developing wireless solutions, especially WLAN and Bluetooth, and with our diverse talents in software design, digital and analog electronics, radio-frequencies and signal processing, we are open to all takeover proposals, total or partial of the Sophia Antipolis teams to start a new activity.”

TS1108-200ITQ1633_Datasheet PDF

The staff had said that with our extensive experience in developing wireless solutions, especially WLAN and Bluetooth, and with our diverse talents in software design, digital and analog electronics, radio-frequencies and signal processing, we are open to all takeover proposals, total or partial of the Sophia Antipolis teams to start a new activity.”

Design engineers find the NVG79 OCXOs have multiple benefits including: low start-up power requirements; low steady state power; very rapid warm-up time; RoHS compliance; miniature size (0.355-inches or 9-mm high); through-hole and surface mount configurations; a wide frequency range (20 KHz to 54 MHz); and custom frequencies available for high-volume orders.

For further information visit www.bliley.com.

TS1108-200ITQ1633_Datasheet PDF

Carbon Design Systems has made available the Carbon Model Library for co-simulation that includes the most advanced ARM processors.

It gives register transfer level (RTL) and firmware engineers a way to simultaneously debug processor integration into complex system-on-chip (SoC) designs.

Carbon's co-simulation approach allows for the hardware design to be run through any of the leading RTL simulators while the firmware is interactively debugged using software tools such as ARM's RealView debugger.

TS1108-200ITQ1633_Datasheet PDF

This new co-simulation library delivers the benefits of virtual platforms to the RTL designer by leveraging the existing RTL infrastructure and avoiding the task of assembling a virtual platform,” said Tom Rathje, Carbon's vice president of Engineering, in a statement.

Co-simulation of the models with RTL code is supported in all leading simulators, including Synopsys VCS, Cadence Incisive Enterprise Simulator and Modelsim from Mentor Graphics. ARM models currently available in the model library include the Cortex A9UP, Cortex A9MP, Cortex A8, Cortex M3, Cortex R4, 1176, 1136, 11MPCore and 926.

TS1108-200ITQ1633_Datasheet PDF

The Carbon Model Library for Co-Simulation is shipping now. Pricing starts at $25,000.

Winchester, UK – Printed silicon ink solar cell technology developer, Innovalight, Inc., (Sunnyvale, California) has demonstrated a record 18 percent conversion efficiency with silicon-ink processed solar cells.

The industry standard size solar cell results have been independently certified by two of the world's recognized solar cell testing centers, the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) and The Fraunhofer Institute for Solar Energy Systems (ISE) in Germany.

Innovalight's proprietary silicon ink and processing technologies allow crystalline silicon solar cell manufacturers to boost output capacity, solar cell performance as well as reduce costs with a simplified additional step to already installed manufacturing lines.

Recently, NREL verified 18 percent efficiency which is a very significant achievement,” said Martha Symko-Davies, senior program manager at NREL. We also are pleased that Innovalight has recently been awarded a $3 million Technology Incubator subcontract through the National Renewable Energy Laboratory, funded under the Department of Energy.”

Homer Antoniadis, chief technology officer for Innovalight, said: Optimized for use with industry standard deposition tools, Innovalight's solution improves the economics of solar cell manufacturing.”

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap